|
|
Evaluation of Fracture Tests on Selected Building Material Specimens via Double-K Model
Havlíková, Ivana ; Králík,, Juraj (referee) ; Němeček,, Jiří (referee) ; Keršner, Zbyněk (advisor)
The purpose of dissertation is the analysis of the calculation of fracture parameters using Double-K fracture model for quasi-brittle specimens with the stress concentrator loaded by three-point bending or wedge splitting. To calculation of these parameters was used the developed DKFM_BUT software in Microsoft Excel application with using of Visual Basic programming language. Furthermore, the adequate shape functions and compliance functions were introduced for the selected wedge splitting test configurations. Main part of this dissertation is the series of comprehensively implemented and evaluated fracture experiments on specimens from advanced building materials, while the attention was paid to the analysis of experimental data. Finally, the selected results obtained using mentioned software support were presented and discussed.
|
|
|
Bend specimens: Numerical support in software ANSYS
Viszlay, Viliam ; Šimonová, Hana (referee) ; Seitl, Stanislav (advisor)
The aim of the thesis is the investigation of fracture-mechanics parameters on specimens made of quasi-brittle materials. The principles of two-parameter fracture mechanics are used. Couple of numerical simulations were done and their outputs are used for two main analysed specimen geometries. For simulations the finite element method software ANSYS is used. In the first part, the thesis focuses on bended specimens. The influence of different geometric parameters on fracture mechanics behaviour of cracked specimen is investigated. For model calibration the outputs of other authors are used. In the second part the specimens for modified compact-tension test (CT test) are analysed. Similar to the first part, the influence of geometric parameters of the specimen (in this case, the specimen size) on fracture mechanics parameters were investigated. The modified CT test was derived from CT test which is commonly used for metal materials testing as the suitable geometry for cement-based composite materials testing. The outputs of both parts are calibration polynomials, which are expressions obtained for different specimen geometries, giving the value of fracture mechanics parameter as the function of specimen geometry. As the example, calibration curves are used to obtain fracture toughness of tested material using the outputs from recent experiment.
|
|
|
Fracture process zone and energy dissipation during fracture of quassi-brittle materials
Klon, Jiří ; Seitl, Stanislav (referee) ; Veselý, Václav (advisor)
The work is focused on the comparison of selected fracture properties of quasi-brittle materials, particularly concrete, determined from results from tests on specimens of different sizes and notch lengths. The first part deals with the study of selected plasticity (failure) criteria and their testing within the mathematical package (MathCAD) for their later intended implementation in a program for estimation of the size and shape of the fracture process zone. Next part is devoted to numerical simulations of three-point bending test of notched beams. These simulations were performed using the ATENA FEM software. Results of the simulations are evaluated using fracture models; this thesis presents values of fracture parameters quantifying the amount of energy dissipated in the fracture process zone.
|
|
|
Modeling of fracture process in quasi-brittle materials
Klon, Jiří ; Eliáš, Jan (referee) ; Veselý, Václav (advisor)
This work is focused on the evaluation of the selected fracture parameters of quasi-brittle material, especially concrete, and an assessment of their dependence on the size and shape of the fracture process zone developing at the tip of the macroscopic crack during fracture. For this purpose, experimentally obtained loading diagrams published in the scientific literature have been utilized. These diagrams have been processed into a form enabling creation and calibration of numerical models of these tests in the ATENA FEM program. The results obtained from simulations of the three-point bending tests on beams of four sizes, with three notches lengths, using the created numerical models were used for determination of fracture parameters of concrete. Results of the work consist of the determined values of the specific energy dissipated for creation of new surfaces of the effective crack and an estimation of the specific energy dissipated in the volume of the fracture process zone, which exhibits specific parameters for each beam size and notch length.
|
|
|
Tomographic investigation of the sandstone fracture toughness
Vavřík, Daniel ; Beneš, Pavel ; Fíla, Tomáš ; Koudelka_ml., Petr ; Kumpová, Ivana ; Vavro, Martin
It is well known that the measured values of the fracture toughness of quasi brittle materials are influenced by material heterogeneity, dimensions, boundary conditions, and unequal tension and compression properties. Standard testing methods supposing isotropic material, in contrary the quasi-brittle materials differ from this theoretical expectation, therefore this approach may fail. The authors present Local Fracture Toughness Testing (LFTT) method to overcome this obstacle. LFFT based on a complex methodology using a series of tomographic reconstructions recorded during specimen loading is calculated independently of the outside boundary conditions.
|
|
|
Possibilities of using 4D computed tomography in fracture tests
Kumpová, Ivana ; Fíla, Tomáš ; Koudelka, Petr ; Rozsypalová, I. ; Keršner, Z. ; Kytýř, Daniel ; Vopálenský, Michal ; Vavřík, Daniel ; Vyhlídal, M. ; Drdácký, Miloš
The paper presents the study of the internal structure and fracture properties of selected quasi-brittle building materials subjected to temperature changes and the possibility of applying the method combining bending fracture tests and time-dependent computed tomography (4D CT). The tested specimens were subjected to hightemperature effects and subsequently tested by a four-point bending during 4D CT. Thus, 3D image information was obtained in different phases of loading and material damage. Comparative compression strength measurements were also performed. These results are in good agreement
|
|
|
Evaluation of Fracture Tests on Selected Building Material Specimens via Double-K Model
Havlíková, Ivana ; Králík,, Juraj (referee) ; Němeček,, Jiří (referee) ; Keršner, Zbyněk (advisor)
The purpose of dissertation is the analysis of the calculation of fracture parameters using Double-K fracture model for quasi-brittle specimens with the stress concentrator loaded by three-point bending or wedge splitting. To calculation of these parameters was used the developed DKFM_BUT software in Microsoft Excel application with using of Visual Basic programming language. Furthermore, the adequate shape functions and compliance functions were introduced for the selected wedge splitting test configurations. Main part of this dissertation is the series of comprehensively implemented and evaluated fracture experiments on specimens from advanced building materials, while the attention was paid to the analysis of experimental data. Finally, the selected results obtained using mentioned software support were presented and discussed.
|
|
|
Modeling of fracture process in quasi-brittle materials
Klon, Jiří ; Eliáš, Jan (referee) ; Veselý, Václav (advisor)
This work is focused on the evaluation of the selected fracture parameters of quasi-brittle material, especially concrete, and an assessment of their dependence on the size and shape of the fracture process zone developing at the tip of the macroscopic crack during fracture. For this purpose, experimentally obtained loading diagrams published in the scientific literature have been utilized. These diagrams have been processed into a form enabling creation and calibration of numerical models of these tests in the ATENA FEM program. The results obtained from simulations of the three-point bending tests on beams of four sizes, with three notches lengths, using the created numerical models were used for determination of fracture parameters of concrete. Results of the work consist of the determined values of the specific energy dissipated for creation of new surfaces of the effective crack and an estimation of the specific energy dissipated in the volume of the fracture process zone, which exhibits specific parameters for each beam size and notch length.
|
|
|
Bend specimens: Numerical support in software ANSYS
Viszlay, Viliam ; Šimonová, Hana (referee) ; Seitl, Stanislav (advisor)
The aim of the thesis is the investigation of fracture-mechanics parameters on specimens made of quasi-brittle materials. The principles of two-parameter fracture mechanics are used. Couple of numerical simulations were done and their outputs are used for two main analysed specimen geometries. For simulations the finite element method software ANSYS is used. In the first part, the thesis focuses on bended specimens. The influence of different geometric parameters on fracture mechanics behaviour of cracked specimen is investigated. For model calibration the outputs of other authors are used. In the second part the specimens for modified compact-tension test (CT test) are analysed. Similar to the first part, the influence of geometric parameters of the specimen (in this case, the specimen size) on fracture mechanics parameters were investigated. The modified CT test was derived from CT test which is commonly used for metal materials testing as the suitable geometry for cement-based composite materials testing. The outputs of both parts are calibration polynomials, which are expressions obtained for different specimen geometries, giving the value of fracture mechanics parameter as the function of specimen geometry. As the example, calibration curves are used to obtain fracture toughness of tested material using the outputs from recent experiment.
|
|
|
Fracture process zone and energy dissipation during fracture of quassi-brittle materials
Klon, Jiří ; Seitl, Stanislav (referee) ; Veselý, Václav (advisor)
The work is focused on the comparison of selected fracture properties of quasi-brittle materials, particularly concrete, determined from results from tests on specimens of different sizes and notch lengths. The first part deals with the study of selected plasticity (failure) criteria and their testing within the mathematical package (MathCAD) for their later intended implementation in a program for estimation of the size and shape of the fracture process zone. Next part is devoted to numerical simulations of three-point bending test of notched beams. These simulations were performed using the ATENA FEM software. Results of the simulations are evaluated using fracture models; this thesis presents values of fracture parameters quantifying the amount of energy dissipated in the fracture process zone.
|
guest ::
